Campus Life

Store 'hoverboards' properly; avoid operation on campus streets and in buildings

UNIVERSITY PARK, Pa. -- Penn State University Police and Public Safety is requesting that students, faculty and staff at all campuses avoid using "hoverboards" on campus roadways and inside of campus buildings, matching the same restrictions currently in place for those who wish to use Segways on University property. Officials also are advising members of the campus community who own such a device to store and charge it in accordance with guidance from the federal Consumer Product Safety Commission (CPSC), and to wear appropriate safety gear while riding.

When they are not being operated, hoverboards are allowed to be carried and stored indoors on campus, however, they are not permitted at ticketed events, as would be the case for a Segway or other similar vehicle.

To minimize risk while operating and charging a hoverboard, University Police and Public Safety reminds all members of the campus community to follow these basic CPSC guidelines:

  • Follow all manufacturer's instructions for storage, charging and use.
  • Do not charge a hoverboard overnight or when you are not able to observe the board.
  • Charge and store your board in a dry place, away from flammable materials.
  • Do not charge directly after riding. Let the device cool for an hour before charging.
  • Look for a mark of a certified national testing laboratory, such as "UL." For a complete listing of certified laboratories, visit https://www.osha.gov/dts/otpca/nrtl/nrtllist.html.
  • Wear appropriate safety gear. The CPSC recommends helmet, knee and elbow pads and wrist guards for protection from falls.

University officials will continue to follow the advice of the Consumer Product Safety Commission and will continue to monitor use of the devices at all campuses. Officials urge all hoverboard owners to use the devices in accordance with the manufacturer's instructions for storage, charging and use, and to follow all other safety advice from the CPSC.

Last Updated January 11, 2016